 |
Choose your Machine:
Choose your Industry:
|
 |
At Hundegger, the foundation of our company is our Employees and our Clients. Our Highly motivated Employees give their best to develop, produce and service the most advanced and economical automated CNC equipment for our Clients. No matter how advanced our machines are we realize that without good service our Clients will not stick around.
|
INTERACTIVE MACHINE TOURS
To begin an interactive machine tour, click on the machine you are interested in.
|
 |
The Hundegger K2i Milling Machine-
The Hundegger K2i is THE machine for Timber Framers, Log Home Builders, and Component Manufacturers throughout Europe and North America. This fully automated saw and joinery machine can mill virtually any traditional Timber Frame connection, process traditional Log Home copes and notches, and cut any shape or size of truss or wall component without any setup while optimally cutting the members to length with computer-controlled accuracy. The K2i is fully-customizable to fit your exact needs---it's a machine you can grow with.
|
|
The Hundegger HM-D Planer-
The Hundegger HM-D planer is an automatic four-sided sizing and surfacing machine. Using the Tersa planing head technology, the HM-D can clean up and square timbers up to 11" x 16" and down to 9/16" x 1-13/16". The computerized sizing module allows a shop to get the precise size of timber it needs and it can ease all four corners from 1/8" up to ľ".
|
 |
|
 |
The Hundegger PBA Panel Cutting Machine-
The Hundegger PBA was developed to cut, notch and mill, larger building components like Glu-Lam trusses and Structural Insulated Panels. With a custom built table determined by your needs, the machine can literally process panels 10 feet wide by 60 feet long, that is, if the industry could produce it. The PBA can save 80% of the lay out and cutting labor in a typical shop and is customizable.
|
|
BAMTEC® Reinforcement Technology. -
The Hundegger BAMTEC® machine is a key component in the BAMTEC® Concrete Reinforcement System. The machine welds individual pieces of rebar into large reinforcement rolls according to the engineering data generated by the Software component of the BAMTEC® Concrete Reinforcement System. The reinforcement rolls are then transported to the job site, positioned, and rolled out. Each piece of rebar is accurately sized and positioned according to the engineering loads of the slab or tilt-up.
|
 |
|
|
